3M Wire Pulling Lubricant
from only POA
3M™ Wire Lubricant is suitable for pulling a wide variety of cable types, such as power, control,instrumentation and communication cables. This includes coaxial and fibre optic cables. This lubricant is compatible with common types of cable jacket materials.
3M™ Wire Pulling Lubricant is a translucent white polymer gel, which produced a low coefficient of friction for smooth low-tension wire and cable pulling. A low coefficient of friction makes cable pulling easier and safer with less change for cable jacket damage from high pulling forces. The lubricant is easy to handle and apply. The material is colourless and non-staining and affords quick and easy cleanup. The low solids content means less conduit blocking if additional pulls are required.
- UL Listed File 842F
- Versatile (compatible with a wide range of cable types and jacket materials).
- Temperature stable. The lubricant can endure freezing and high temperature storage conditions and will not phase separate.
- Colourless, non-staining and is easy to cleanup.
- Low coefficient of friction.
- Low solids content <5.5% solids.
- Does not contain any wax, grease or silicone.
**Due to item weight, if you would like more than one unit please contact your local Jointing Tech branch for a discounted shipping rate
- Thixotropic translucent gel
- Percent non-volatile solids: 4.5 - 5.5%
- PH: 7.5 – 9.0
- Temperature use range: -7°C to 44°C
- Temperature stability: ≤ 10% change in Brookfield viscosity from 4.4°C to 40°C.
- No separation after five freeze/thaw cycles or 24 hours at 50°C
- Flammability:No flash point
