Cembre B1350-CE Hydraulic Crimp Tool 18v
from only £124.00 Ex VAT
Cembre B1350-CE Battery Hydraulic Crimping Tool with Case (10-400mm²)
New Li-Ion 18 V 4 Ah batteries offer a higher capacity than 14.4 V 3 Ah, while greater crimping speed and crimping force result from a revitalized hydraulic system with double speed action: a rapid approach of the dies to the connector then a slower, more powerful speed for crimping
- A maximum pressure sensor and security valve assure greater precision and repeatability of the pressure cycle and double the provision for operator safety
- Designed with less weight and improved balance, B1350-C is easily manageable during the crimping process and, by the use of bi-component plastics, has a shell with high resistance to wear and damage
- Rubber grip inserts, low noise and minimal vibration aid operator comfort while additional convenience and safety are provided by LED lighting of the working area
- Crimping cycle data (up to 200,000 events) is automatically stored on a memory card for transfer to PC by USB interface
- The tool features a double speed action: a fast advancing speed for rapid approach of the dies to the connector and a slower more powerful speed for crimping
- The crimping head can rotate through 180° for ease of operation
- The B1350-C will accept all semi-circular slotted dies common to most 13 kN tools (U dies)
- Fitted with a maximum hydraulic pressure valve
- Complete with a battery condition display which, after every operation, indicates the residual battery power
- Extremely quiet in operation, with very little vibration
- Ergonomically designed with a sculptured body for operator comfort
- The OLED display provides essential real time tool operating information data including:
- Crimping force being generated, for confirmation of adherence to norms and best practice
- Battery power availability
- Tool identification, LED state, reset, no. of operational and service crimping cycles
- Tool service required to maintain optimum condition
The tool is supplied in a sturdy plastic case type VAL P39 suitable for storing:
- Basic tool with battery, wrist strap and shoulder strap
- Spare battery
- Battery charger
- Plastic carrying case suitable for storing the tool and 8 sets of semi-circular slotted dies
Dies not included, sold separately
MAIN APPLICATIONS - max section mm2
LV lugs & splices | Insulated terminals | C Sleeve Connectors | HV lugs & splices |
400 | 240 | 185 | 400 |