Cembre Hydraulic Crimping Tool - HT45-E
from only £37.80
Cembre HT45-E Hydraulic Crimp Tool c/w Hard Plastic Carry Box
The HT45-E Cembre Hydraulic Crimping Tool is a lightweight and compact compression tool usually used to compress connectors attached to overhead lines and other general applications.
- The device is equipped with spring loaded handles meaning that it can be used with one hand for added convenience - with one hand free, the free hand can be used to position the connector whilst the other hand advances the dies. Also, the tool head can be fully rotated through 180 degrees for ease of operation and comfort for the user.
- Application range: suitable for installing electrical compression connectors for conductors up to 150mm2 (300 MCM)
- Crimping force: 50kN (6 sh ton)
- Rated operating pressure: 600 bar (8,700 psi)
* Dies not included and must be purchased separately
- Dimensions: Length 346mm (13.6in), Width (handles closed) 130mm (5.1in), Width (handles open) 250mm (9.8in)
- Weight (without dies): 2kg (4.4lbs)
- Recommended oil: Agip Arnica HI 32 or Shell Tellus Oil TX 32
Dust, sand and dirt are a danger for any hydraulic device. Every day, after use, the tool must be cleaned with a clean cloth, taking care to remove any residual, especially close to pivots and moveable parts.
